Industrial Automation Power Supplies » Alimentatorishop

Power Supplies Automation

Hundreds of models of ac dc switching stabilized power supplies for the application: Industrial Automation.

Looking for a power supply for industrial automation?

The category includes all models designed or usually used inside automation panels and mounted on Din Rail, as well as models enclosed in a metal box or open-frame / exposed designed to be used inside the container of the equipment that uses it.

There are also some models designed for mounting on printed circuit board (PCB).

MeanWell HDR-150 DIN Rail Power Supply 150W - Voltages 12V, 15V, 24V and 48V
Available
The Mean Well DIN RAIL HDR-150 series power supplies are entry level products, with a 3-year warranty, designed for mounting in electrical panels via DIN rail.Main features of the 150W DIN rail power supply:


Affordable and reliable
Installable on DIN rail TS-35/7.5 or 15
Practical terminal blocks for input (below) and output (above).
Safe: equipped with protections against overvoltage, short circuit, and overload
Class 2 isolation (without ground)
Perfect for installation in industrial machines and electrical panels
SilentNo fans
3-year warranty
Efficiency up to 90.5%
No-load consumption <0.3W
Input: 85-264VAC
Certifications: UL, CE
Dimensions: 105x90x54.5 mm



 

€39.41
YSDN240 Yingjiao Din guide Power supply 240W Voltages 24V. 48V
Available
Yinjiao DIN Rail Power Supply YSDN240


Features

Rated Power: 240W
Input: 90-264V AC, 47-63Hz
Adjustable DC Output Voltage
Integrated Active PFC Function
Can be installed on DIN rail TS-35/7.5 or 15
Protection: Short Circuit, OCP, OVP (Overvoltage)
Output: 24-48V


€42.42
UHP-200 MeanWell Power Supply 200W Voltages 3.3V 4.2V 5V 12V 15V 24V 36V 48V 55V
Available
The UHP-200 series is a 200W enclosed AC/DC power supply with easy installation, it has been specifically designed for applications such as ITE applications, industrial automation.
The UHP-200 series works with an input voltage of 90-264 VAC, it is especially required for industrial applications and electronic equipment.


Features

Low profile and slim (26 mm)
Built-in active PFC function
Fanless design, 200W convection
Can withstand 300VAC surge input for 5 seconds
-30 ~ + 70 ℃ working temperature
Protections: short circuit, overload, overvoltage, overtemperature
DC OK active signal and redundant function (option)
Operating altitude up to 5000 meters
LED indicator for power on
3 years warranty
Dimensions: 194x55x26mm


€43.47
NDR-240 MeanWell - DIN rail 240W Power Supply - Voltages 24V, 48V
Available
The DIN RAIL power supplies from the Mean Well NDR-240 series are entry level products, with a 3-year warranty, and are developed for mounting in electrical panels via DIN TS-35/7.5 or TS-35/15 rail.


Main Features:

Economical and reliable
Slim design 63mm wide
Installable on DIN TS-35/7.5 or 15 rail
Active PFC
Practical terminal blocks for input (below) and output (above).
Safe: equipped with protections against overvoltage, short-circuit and overload
Perfect for installation in industrial machines and electrical panels
Quiet: No fans
3 year warranty
Efficiency up to 90%
Input: 90-264VAC
Certifications: CE, UL
Dimensions: 63*125.2*113.5mm


€44.24
FLEX6012A Power Supply Adelsystem Din Rail 60W 12V Input 110/220 VAC
Available

Input: 115 – 230 Vac
Output: 12 Vdc 60°C
Power: from 36 to 72 W
Efficiency up to 88%
Overload without shutdown, up to 50%
"Power Good" relay
Three output protection modes:


Hiccup Mode
Continuous Output Mode
Manual Reset


Mountable on DIN rail
Extremely reduced dimensions
3-year warranty
€44.52