Industrial Automation Power Supplies » Alimentatorishop

Power Supplies Automation

Hundreds of models of ac dc switching stabilized power supplies for the application: Industrial Automation.

Looking for a power supply for industrial automation?

The category includes all models designed or usually used inside automation panels and mounted on Din Rail, as well as models enclosed in a metal box or open-frame / exposed designed to be used inside the container of the equipment that uses it.

There are also some models designed for mounting on printed circuit board (PCB).

Non disponibile - contattaci
YSDR40 Yingjiao Din guide redundancy module 40A Voltages 12V. 24V. 48V
Yinjiao Redundancy Module DIN Guide YSDR40-12, YSDR40-24, YSDR40-48


Features

Supports 1+1 and N+1 redundancy systems.
It has 2 input channels and 1 output.
Suitable for redundancy operation of 12V/24V/48V systems.
The output current can reach up to 40A.
Cooled by air convection.
It has 2 built-in channels for the DC OK signal and alarm relay contacts.
It is installed on a DIN TS35/7.5 or 15 rail.


EDR-120 MeanWell - DIN rail power supply 120W - Voltages 12V, 24V, 48V
Available
The DIN RAIL power supplies from the Mean Well EDR-120 series are entry-level products, with a 2-year warranty, they are designed for mounting in an electrical panel using DIN TS-35/7.5 or TS-35/15 rails. Also, its compact design with just 40mm width saves precious space in the panel.
Main Features:



Economical and reliable
Slim design 40mm wide
Can be installed on DIN TS-35/7.5 or 15 rail
Practical terminals for input (below) and output (above).
Safe: equipped with overvoltage, short-circuit, and overload protections
Perfect for installation in industrial machines and electrical panels
Quiet: No fans
2-year warranty
Efficiency up to 88.5%
Input: 90-264VAC
Certifications: UL, CE
Dimensions: 40x125.2x113.5mm


€24.78
EDR-75 MeanWell Din Rail Power Supply 75W Input 90 ~ 264VAC Voltages 12V 24V 48V
Available
The EDR-75 series is a power supply on a DIN rail of 75W with easy installation, it has been specifically designed for applications such as ITE applications, industrial automation.


Features:

Universal AC / Full range
Protections: short circuit / overload / overvoltage / overtemperature
Cooling by free air convection
Can be installed on DIN rail TS-35 / 7.5 or 15
UL 508 approved (industrial control equipment)
Industrial immunity level EN 61000-6-2 (EN 50082-2)
100% full load burn-in test
2 years warranty
Dimensions: 32x125.2x102mm




 
€25.06