DIN RAIL power supplies by Mean Well

Active filters
TDR-960 MeanWell Din Rail Power Supply 960W Voltages 24V 48V
Available
Features Mean Well TDR-960 series



Wide range 340-550VAC three-phase input (possible operation also in dual phase)
110 mm width
Compliance of built-in active PFC function to EN61000-3-2
High efficiency 94.5% and low power dissipation
Protections: short circuit, overload, overvoltage, overtemperature
Free air convection cooling
Built-in constant current limiting circuit
Can be installed on DIN TS-35 / 7.5 or 15 rail
UL508 approved (industrial control equipment)
Industrial immunity level EN 61000-6-2 (EN 50082-2)
Current sharing up to 3840 W (3 + 1)
Integrated DC OK relay contact
Full load burn-in test at 100%
3 years warranty
Dimensions: 110x125.2x150mm




 
€277.69
TDR-480 MeanWell - DIN rail power supply 480W Voltage 24V 48V
Available
The DIN RAIL power supplies by Mean Well from the TDR-480 series are entry-level products, with a 3-year warranty, and are developed for mounting in an electrical panel via DIN TS-35/7.5 or TS-35/15 rail.


Main features:

Economical and reliable
Slim design 85.5mm wide
Can be installed on DIN TS-35/7.5 or 15 rail
Practical terminal blocks for input (below) and output (above).
Safe: equipped with protections from overvoltage, short-circuit and overload
Perfect for installation in industrial machines and electrical panels
Quiet: No fans
3-year warranty
Efficiency up to 93%
Input: Three-phase 340 ~ 550VAC (Two-phase possible) 480 ~ 780VDC
Certifications: UL, CE
Dimensions: 85.5 x 125.2 x 128.5mm


€145.39
TDR-240 MeanWell Din Rail Power Supply 240W Voltages 24V 48V
Available
Features



Wide range input 340-550VAC three-phase (also operates in dual phase)
Width only 63 mm
Compliance of built-in active PFC function to EN61000-3-2
High efficiency 92% and low power dissipation
Full power between -30 ~ + 60 ° C
Protections: short circuit, overload, overvoltage, overtemperature
Free air convection cooling
Built-in constant current limiting circuit
Can be installed on DIN TS-35 / 7.5 or 15 rail
UL61010 approved (industrial control equipment)
Industrial immunity level EN 61000-6-2 (EN 50082-2)
Current sharing up to 3840 W (3 + 1)
Integrated DC OK relay contact
3 years warranty
Dimensions: 63x125.2x113.5mm


€91.28
NDR-75 MeanWell Din Rail Power Supply 75W Voltages 12V 24V 48V
Available
The NDR-75 series is a power supply on a DIN rail of 75W with easy installation, it has been specifically designed for applications such as ITE applications, industrial automation.


Features

Universal AC
Protections: short circuit, overload, overvoltage, overtemperature
Free air convection cooling
Can be installed on DIN TS-35 / 7.5 or 15 rail
UL 508 approved (industrial control equipment)
Industrial immunity level EN 61000-6-2 (EN 50082-2)
100% full load burn-in test
3 years warranty
Dimensions: 32x125.2x102mm


€26.53
NDR-480 MeanWell Din Rail Power Supply 480W Voltages 24V 48V
Available
Mean Well DIN rail power supply NDR-480
The NDR-480 series is a power supply on a DIN rail of 480W with easy installation, it has been specifically designed for applications such as ITE applications, industrial automation.


Features

Universal AC
Protections: short circuit, overload, overvoltage, overtemperature
Free air convection cooling
Can be installed on DIN rail TS-35 / 7.5 or 15
UL 508 approved (industrial control equipment)
Industrial immunity level EN 61000-6-2 (EN 50082-2)
100% full load burn-in test
3 years warranty
Built-in active PFC function
Dimensions: 85.5x125.2x128.5mm


€115.50
NDR-240 MeanWell - DIN rail 240W Power Supply - Voltages 24V, 48V
Available
The DIN RAIL power supplies from the Mean Well NDR-240 series are entry level products, with a 3-year warranty, and are developed for mounting in electrical panels via DIN TS-35/7.5 or TS-35/15 rail.


Main Features:

Economical and reliable
Slim design 63mm wide
Installable on DIN TS-35/7.5 or 15 rail
Active PFC
Practical terminal blocks for input (below) and output (above).
Safe: equipped with protections against overvoltage, short-circuit and overload
Perfect for installation in industrial machines and electrical panels
Quiet: No fans
3 year warranty
Efficiency up to 90%
Input: 90-264VAC
Certifications: CE, UL
Dimensions: 63*125.2*113.5mm


€57.33
NDR-120 MeanWell Din Rail Power Supply 120W Voltages 12V. 24V. 48V.
Available
Mean Well DIN rail power supply NDR-120
The NDR-120 series is a 120W DIN rail power supply with easy installation, specifically designed for applications such as ITE applications, industrial automation.


Features

Universal AC
Protections: short circuit, overload, overvoltage, overtemperature
Free air convection cooling
Can be installed on DIN rail TS-35 / 7.5 or 15
UL 508 approved (industrial control equipment)
Industrial immunity level EN 61000-6-2 (EN 50082-2)
100% full load burn-in test
3 year warranty
Dimensions: 40x125.2x113.5mm


€30.87
MeanWell HDR-150 DIN Rail Power Supply 150W - Voltages 12V, 15V, 24V and 48V
Available
The Mean Well DIN RAIL HDR-150 series power supplies are entry level products, with a 3-year warranty, designed for mounting in electrical panels via DIN rail.Main features of the 150W DIN rail power supply:


Affordable and reliable
Installable on DIN rail TS-35/7.5 or 15
Practical terminal blocks for input (below) and output (above).
Safe: equipped with protections against overvoltage, short circuit, and overload
Class 2 isolation (without ground)
Perfect for installation in industrial machines and electrical panels
SilentNo fans
3-year warranty
Efficiency up to 90.5%
No-load consumption <0.3W
Input: 85-264VAC
Certifications: UL, CE
Dimensions: 105x90x54.5 mm



 

€34.02